Effect of pulsed electric field (PEF) on NaCl diffusion in beef and consequence on meat quality.

The impact of various field strength (2, 3, 4 kV/cm) and treatment time (60s and 90s) combinations on NaCl content and diffusion coefficient of beef were evaluated in the current study. Weight change, water content, water holding capacity, and texture of beef after brining were also explored. The results demonstrated pulsed electric field (PEF) pre-treatment significantly increased NaCl uptake when the brining time was 150 min (P < 0.05). The maximum NaCl content increased by 19.50% and the diffusion coefficient increased by 58.50%. Relatively mild PEF (60s) could improve beef qualities, but longer treatment time (90s) was detrimental to these qualities. Meanwhile, more complete myofibrillar structure and lower lipid oxidation extent were observed in the samples treated by PEF, contributing to the higher a* values. In conclusion, short processing time (60s) and high field strength (4 kV/cm) treatment is a potential strategy for meat brining acceleration and quality improvement in practical industrial production.

An unfolding/aggregation kinetic instructed rational design towards improving graft degree of glycation for myofibrillar protein.

Glycation is an effective strategy for the application of myofibrillar protein (MP) in beverage formulas by improving water solubility. In conventional glycation, the efficiency was limited as MP-saccharides conjugates mostly produced at low temperature due to thermosensitivity. This study was aimed to explore unfolding/aggregation kinetics of MP, including aggregate behavior, structural characteristics, and micromorphology, which guided the selection of temperature for glycation. It was shown that 40 °C/47.5 °C were critical temperature for MP unfolding/aggregation, respectively. Accordingly, an innovative technology of glycation (cyclic continuous glycation, CCG) was established by combining such temperatures. The results confirmed that cyclic continuous heating (CCH) inhibited excessive exposure of sulfhydryl and hydrophobic groups impeding protein aggregation. Importantly, it was revealed that rational designed CCG promoted covalent binding of MP to glucose by regulating unfolding-aggregation balance, exhibiting higher glycation degree. Overall, CCG-modified MP is expected to motivate the application of meat proteins in food formulations.

Effects of pre-formulation and post-cooking method on the rheological and gelation properties of 3D printed chicken products.

This study investigated the influence of oil type (olive, soybean, and peanut oil) and post-cooking methods (oven bake and microwave) on the quality of 3D printed chicken meat products. The Ostwald-de-Waele model was used to describe the flow behavior of chicken meat paste (R2 > 0.995). Oil-fortified groups present significantly lower consistency index (K) and flow behavior index (n), indicating better fluidity. A modified Cox-Merz rule was applied by multiplying angular frequency with shift factors (αSF). Surprisingly, the values of αSF are well-correlated with accuracy parameters of 3D printed cubes (|r| >0.8). For post-heating methods, baking results in higher fluid loss but contributes to a smoother surface. The microwaved gels showed better fluid retention ability and higher accuracy but lost the detail shape of the 3D printing model. Overall, the PO (peanut oil) meat emulsion group presented better textural properties and flat surfaces than other oil-added counterparts.

Revealing extracellular protein profile and excavating spoilage-related proteases of Aeromonas salmonicida based on multi-omics investigation.

Aeromonas is a ubiquitous aquatic bacteria, and it is a significant factor contributing to meat spoilage during processing and consumption. The abilities of Aeromonas salmonicida 29 and 57, which exhibit spoilage heterogeneity, to secrete protease, lipase, hemolysin, gelatinase, amylase, and lecithinase were confirmed by plate method. A total of 3948 proteins were identified by ITRAQ in extracellular secretions of A. salmonicida, and 16 proteases were found to be potentially related to spoilage ability. The complete genome sequence of A. salmonicida 57 consists of one circular chromosome and three plasmids, while A. salmonicida 29 consists of one circular chromosome, without a plasmid. Transcriptomic analysis revealed a significant number of DEGs were up-regulated in A. salmonicida 29, which were mainly enriched in metabolic pathways (e.g., amino acid metabolism, carbohydrate metabolism), indicating that A. salmonicida 29 had better potential to decompose and utilize nutrients in meat. Six protease genes (2 pepB, hap, pepA, ftsI, and pepD) were excavated by combined ITRAQ with transcriptome analysis, which potentially contribute to bacterial spoilage ability and exhibit universality among other dominant spoilage bacteria. This investigation provides new insights and evidence for elucidating metabolic and spoilage phenotypic differences and provides candidate genes and strategies for future prevention and control technology development.

Effects of different mixed starter cultures on microbial communities, taste and aroma compounds of traditional Chinese fermented sausages.

The aim of this study was to investigate and compare the effects of different mixed starter cultures (Lactiplantibacillus plantarum and Staphylococcus simulans) on the bacterial communities and flavor of fermented sausages. The results indicated that native starters grew well in fermented sausages and became dominant at the end of ripening. Among them, Lactobacillus spp. had the highest relative abundance, followed by Staphylococcus spp. In addition, the inoculation of the mixed starters promoted the formation of taste and aroma compounds that contribute to the overall flavor of the fermented sausages. Among them, the L. plantarum CQ01107 + S. simulans CD207 (CCA) treatment was found to have the highest umami amino acid, nucleotide, lactic acid, fatty acid and ketone contents (P < 0.05), as well as excellent sensory properties. In conclusion, the CCA starter may be a desirable starter culture to enhance the flavor of fermented sausages.

Effects of Wooden Breast Myopathy on Meat Quality Characteristics of Broiler Pectoralis Major Muscle and Its Changes with Intramuscular Connective Tissue.

This study aimed to investigate the effect of wooden breast (WB) myopathy on chemical composition, meat quality attributes and physiochemical characteristics of intramuscular connective tissue (IMCT) of broiler pectoralis major (PM) muscle. Thirty-six fillets were classified into varying degrees of WB condition, including normal, moderate and severe. Results show that WB myopathy altered the collagen profile in PM muscle by increasing total collagen content and decreasing collagen solubility. The composition of macromolecules in IMCT, including hydroxylysyl pyridoxine cross-linking, decorin and glycosaminoglycans, were increased with the severity of WB myopathy. Differential scanning calorimetry analysis indicated higher denaturation temperatures and lower denaturation enthalpy of IMCT for WB. Secondary structures of α-helix and ß-sheet in the IMCT of WB were changed to ß-turn and random coil. In addition, chemical composition and meat quality attributes showed a correlation with collagen profile and IMCT characteristics. Overall, this study emphasizes the effect of WB myopathy on IMCT and their contributions to meat quality variation.

Improved emulsifying properties of water-soluble myofibrillar proteins at acidic pH conditions: Emphasizing pH-regulated electrostatic interactions with chitosan.

Water-soluble muscle protein with enhanced functionalities has attracted great interest for low-salt food design. Electrostatic interactions of chitosan (CS) with myofibrillar proteins (MP) in water-aqueous solution at acidic pHs (4.0-6.5) were investigated, and how pH regulated complex formation, microstructures, conformation changes, and emulsifying capacity was systematically explored. At pH 4.0-4.5, MP and CS were positively charged and displayed a co-soluble system, exhibiting small particles and high solubility. When the pH increased to near the isoelectric point (pI) of MP (pH 5.0-6.0), electrostatic interactions largely inhibited the aggregation of MP by forming smaller particle complexes. The flexible structures and improved amphiphilic properties promoted protein absorption at the oil-water interface, further improving the emulsion stability. When the pH increased to 6.5, large aggregates were formed causing poor functionalities. This study could provide great insights to further exploit meat-protein-based low-salt functional foods in novel food design.

The evaluation of mixed-layer emulsions stabilized by myofibrillar protein-chitosan complex for delivering astaxanthin: Fabrication, characterization, stability and in vitro digestibility.

Muscle protein based functional foods have been attracted great interests in novel food designing. Herein, myofibrillar protein (MP)-chitosan (CH) electrostatic complexes were employed to fabricate mixed-layer emulsions to protect and deliver astaxanthin. The MP/CH complex fabricated mixed-layer emulsions displayed higher stability against pH and temperature changes, exhibiting smaller droplet and homogenous distributions. After UV-light irradiation for 8 h, the mixed-layer emulsions had higher astaxanthin retention (69.11 %, 1:1 group). During storage, a lower degree of lipid oxidation, protein oxidation and higher astaxanthin retention were obtained, indicating desirable protections of mixed-layer emulsions. The vitro digestion reveled the mixed-layer emulsions could decrease the release of free fatty acids. Meanwhile, the bioaccessibility of astaxanthin was higher (30.43 %, 2:1 group) than monolayer emulsion. In all, the MP/CH prepared mixed-layer emulsions could protect and deliver fat-soluble bioactive compounds, and contributed to develop muscle protein based functional foods to meet the needs of slow and controlled release.

Analysis of the suitable thawing endpoint of the frozen chicken breast using video recording analysis, shear force, and bioelectrical impedance measurement.

This study focuses on analyzing the texture properties and bioelectrical impedance characteristics of frozen chicken breasts during low-temperature thawing, meanwhile, we also compared the differences in physiochemical properties. Frozen chicken breasts were thawed at 4 ± 2°C for 2, 4, 6, 8, and 10 h separately, then the physiochemical properties (color, pH, water-holding capacity, water distribution), the texture properties (easy-to-cut level), and the bioelectrical impedance were determined and analyzed. The easy-to-cut level of the samples was evaluated by the sensory panel and two indexes, one is Warner-Bratzler shear force measured by texture analysis machine, and the other is cutting speed value calculated by the consumer-oriented cutting behavior analysis using frame-by-frame video recording analysis method. These two methods were used to characterize the easy-to-cut level of the frozen samples during thawing from the industrial processing and home cooking standpoint. Strong correlations were observed between the easy-to-cut level and the bioelectrical impedance of the frozen chicken breasts during thawing. The impedance magnitude at 100 kHz showed a high correlation coefficient (R2 = .9417) with Warner-Bratzler shear force, and the impedance magnitude at 50 Hz showed a high correlation coefficient (R2 = .8658) with cutting speed. Our results indicated the acceptability of using bioelectrical impedance to evaluate the easy-to-cut thawing endpoint for both industry processing and home cooking.

Aggregate Size Modulates the Oil/Water Interfacial Behavior of Myofibrillar Proteins: Toward the Thicker Interface Film and Disulfide Bond.

Myofibrillar protein (MP) aggregate models have been established to elucidate the correlation between their aggregate sizes and interfacial properties. The interfacial layer thickness was measured by the polystyrene latex method and quartz crystal microbalance with dissipation measurement. Interfacial conformations were then characterized in situ (front-surface fluorescence spectroscopy) and ex situ (reactive sulfhydryl group and secondary structure measurement following MP displacement). The viscoelasticity of the interfacial film and its resistance to surfactant-induced competitive displacement were reflected by the dilatational rheology and dynamic interfacial tension with the bulk phase exchange. Finally, we compared the findings of competitive displacement before/after adding a sulfhydryl-blocking agent, N-ethylmaleimide, to highlight the role of S-S linkage on interfacial film formation and stability. We substantiated that the aggregate size of the MP governed their interfacial properties. Small-sized aggregates exhibited more ordered secondary structures on the oil-water interface, which was conducive to the adsorption ratio of the protein and the adsorption dynamics. Although larger aggregates lowered the diffusion rate during interfacial film formation, they allowed the thicker and more viscoelastic interfacial film to be constructed afterward through more disulfide bond formation, resulting in greater resistance to surfactant-induced competitive displacement.

Silver Nanoparticle Sensor Array-Based Meat Freshness Inspection System.

The series of biochemical reactions, metabolic pathways, and regulatory interactions that occur during the storage of meat are the main causes of meat loss and waste. The volatile compounds produced by these reactions, such as hydrogen sulfide, acids, and amines, can directly indicate changes in the freshness of meat during storage and sales. In this study, a one-pot hydrothermal method based on a surface control strategy was used to develop nanoparticles of silver with different reactivities, which were further immobilized in agar powder to develop a colorimetric sensor array. Due to the different chemical interactions with various volatile compounds, the colorimetric sensor array exhibited distinct color changes. The study demonstrates significant differences between 12 different volatile compounds and provides a quantitative and visual method to reveal rich detection indicators. The colorimetric sensor array is an economical and practical multi-analyte identification method. It has many potential applications such as food packaging, anti-counterfeiting, health monitoring, environmental monitoring, and optical filters.

Tea polyphenols coated sodium alginate-gelatin 3D edible scaffold for cultured meat.

This study aimed to use edible scaffolds as a platform for animal stem cell expansion, thus constructing block-shaped cell culture meat. The tea polyphenols (TP)-coated 3D scaffolds were constructed of sodium alginate (SA) and gelatin (Gel) with good biocompatibility and mechanical support. Initially, the physicochemical properties and mechanical properties of SA-Gel-TP scaffolds were measured, and the biocompatibility of the scaffolds was evaluated by C2C12 cells. SEM results showed that the scaffold had a porous laminar structure with TP particles attached to the surface, while FT-IR results also demonstrated the encapsulation of TP coating on the scaffold. In addition, the porosity of all scaffolds was higher than 40% and the degradation rate during the incubation cycle was less than 40% and the S2-G1-TP0.1-3 h scaffold has excellent cell adhesion and extension. Subsequently, we inoculated rabbit skeletal muscle myoblasts (RbSkMC) on the scaffold and induced differentiation. The results showed good adhesion and extension behavior of RbSkMC on S2-G1-TP0.1-3 h scaffolds with high expression of myogenic differentiation proteins and genes, and SEM results confirmed the formation of myotubes. Additionally, the adhesion rate of cells on scaffolds with TP coating was 1.5 times higher than that on scaffolds without coating, which significantly improved the cell proliferation rate and the morphology of cells with extension on the scaffolds. Furthermore, rabbit-derived cultured meat had similar appearance and textural characteristics to fresh meat. These conclusions indicate the high potential of the scaffolds with TP coating as a platform for the production of cultured meat products.

Unexpected variations in the effects of ultrasound-assisted myofibrillar protein processing under varying viscosity conditions.

The efficient synthesis of myofibrillar protein(MRN)-gallic acid (GAD) complex in ultrasound (UID)-assisted processing is a challenging problem in food manufacturing. In this investigation, the effect of viscosity characteristics on the efficiency of UID processing in MRN-based beverages was analyzed. Both viscosity and surface tension can increase sono-physico-chemical effects on the degradation of terephthalic acid and crystal violet, with surface tension having a more significant effect (negative correlation, R2 = 0.99) than viscosity (positive correlation, R2 = 0.79). The structural indicators and microstructure demonstrated that the reaggregation and refolding of the MRN structure during the modification procedure occurred with relatively small three-dimensional dimensions. Compared to the MRN/GAD4 group, the water contact angle of the MRN/GAD7 system enhanced by 129.44%, leading to greater system stability. The ABTS-scavenging capacity of the system increased by approximately 19.45% due to the increase in viscosity of these two categories.

Effects of ultrasound treatment on the morphological characteristics, structures and emulsifying properties of genipin cross-linked myofibrillar protein.

Genipin is a natural crosslinker that improves the functional properties of proteins by modifying its structures. This study aimed to investigate the effects of sonication on the emulsifying properties of different genipin concentration-induced myofibrillar protein (MP) cross-linking. The structural characteristics, solubility, emulsifying properties, and rheological properties of genipin-induced MP crosslinking without sonication (Native), sonication before crosslinking (UMP), and sonication after crosslinking (MPU) treatments were determined, and the interaction between genipin and MP were estimated by molecular docking. The results demonstrated that hydrogen bond might be the main forces for genipin binding to the MP, and 0.5 µM/mg genipin was a desirable concentration for protein cross-linking to improve MP emulsion stability. Ultrasound treatment before and after crosslinking were better than Native treatment to improve the emulsifying stability index (ESI) of MP. Among the three treatment groups at the 0.5 µM/mg genipin treatment, the MPU treatment group showed the smallest size, most uniform protein particle distribution, and the highest ESI (59.89%). Additionally, the highest α-helix (41.96%) in the MPU + G5 group may be conducive to the formation of a stable and multilayer oil-water interface. Furthermore, the free groups, solubility, and protein exposure extent of the MPU groups were higher than those of UMP and Native groups. Therefore, this work suggests that the treatment of cross-linking followed by ultrasound (MPU) could be a desirable approach for improving the emulsifying stability of MP.

Different protein-anthocyanin complexes engineered by ultrasound and alkali treatment: Structural characterization and color stability.

Through alkali treatment (AT) and ultrasound (UT)-assisted processing producing covalent protein-anthocyanin complexes, we investigated the impact of treatment methods and protein types on conjugation efficiency, protein structure, and color stability. Our findings revealed the effective grafting of anthocyanins (ACNs) onto proteins, with myofibrillar protein (MP) exhibiting the highest conjugation efficiency of 88.33% after UT (p <.05). UT accelerated the structure unfolding of distinct protein samples, leading to the exposure of sulfhydryl, and hydrophobic groups in proteins, and enhanced the oxidation stability of ACNs. Notably, the modified ACNs maintained a favorable pH-color relationship, while U-MP showed a significantly higher absorbance (0.4998) than the other groups (p <.05) at pH 9.0, demonstrating an outstanding color improvement. UT-assisted processing also accelerated the NH3 reaction. Thus, the combination of UT and MP holds the potential for pH-color-responsive intelligent packaging and increases the efficiency of UT processing.

Insights into Intramuscular Connective Tissue Associated with Wooden Breast Myopathy in Fast-Growing Broiler Chickens.

Wooden breast myopathy (WBM) is a meat abnormality affecting pectoralis majors (PMs) of fast-growing broiler chickens. WBM-affected PMs exhibited varied meat qualities with increasing WBM severity. Normal PMs (NOR), mild WBM-affected PMs (MIL), moderate WBM-affected PMs (MOD), and severe WBM-affected PMs (SEV) were selected as raw materials. The structure and organization of connective tissue and fibrillar collagen were investigated through immersing with sodium hydroxide solution, Masson trichrome staining, and using an electron microscope. The mechanical strength of intramuscular connective tissue was analyzed via the shear force of samples treated with sodium hydroxide solution. The thermal property and secondary structure of connective tissue were analyzed by differential scanning calorimetry and Fourier transform infrared spectroscopy. The obtained connective tissue was dissolved in a sodium hydroxide solution for the evaluation of the physicochemical properties of proteins, including particle size, molecular weight, surface hydrophobicity, and intrinsic fluorescence. In particular, the particle size was measured using a zeta potential instrument. The molecular weight was analyzed by sodium dodecyl sulfate polyacrylamide gel electrophoresis. The surface hydrophobicity and intrinsic fluorescence were measured by spectroscopy technology. Histologically, macrophage infiltration, myodegeneration and necrosis, regeneration, fibrous connective tissue, and thickened perimysial connective tissue were observed in WBM-affected PMs, especially SEV with fibrosis, including blood vessels. Compared with NOR, WBM led to increased average diameter of the collagen fibrils in perimysial (36.61 nm of NOR to 69.73 nm of SEV) and endomysial (34.19 nm of NOR to 56.93 nm of SEV) layers. A significant increase (p < 0.05) was observed in the mechanical strength (2.05 N to 5.55 N) of fresh PMs and the thermal transition temperature (onset temperature (TO), 61.53 °C to 67.50 °C; maximum transition temperature (TM), 66.46 °C to 70.18 °C; termination temperature (TE), 77.20 °C to 80.88 °C) of connective tissue from NOR to SEV. Cooking decreased the mechanical strength, and MOD samples showed the highest mechanical strength (1.24 N, p < 0.05), followed by SEV (0.96 N), MIL (0.93 N), and NOR (0.72 N). For proteins in connective tissue, random coil (19.64% to 29.61%, p < 0.0001), particle size (p < 0.05), and surface hydrophobicity (p < 0.05) increased with the decrease in the α-helix (14.61% to 11.54%, p < 0.0001), ß-sheet (45.71% to 32.80%, p < 0.0001), and intrinsic fluorescence of proteins from NOR to SEV. The molecular weights of intramuscular connective tissue proteins were in the ranges of >270 kDa, 180-270 kDa, 110-180 kDa, 95-100 kDa, and <15 kDa. Taken together, WBM resulted in thickened organization, tightly packed collagen fibrils, increased mechanical strength and thermal temperature, and increased particle size, surface hydrophobicity, and intrinsic fluorescence of proteins in connective tissue, as the WBM severity increased.

Comparisons between Myofibrillar Protein-Luteolin Conjugates Fabricated through Covalent and Noncovalent Modification.

Protein-flavonoid conjugation is considered to effectively enhance the functionality of proteins, although how different binding modes affect the conformation and antioxidative properties of these conjugates has yet to be revealed. Herein, myofibrillar protein (MP)-luteolin (Lut) conjugates were noncovalently and covalently constructed using equivalent amounts of Lut (10.00, 20.11, and 69.60 µmol/g protein). Fluorescence quenching confirmed that hydrophobic interactions were the main forces in noncovalent MP-Lut conjugates and that the binding was entropy-driven. Liquid chromatography-tandem mass spectrometry results confirmed that Lut could be covalently grafted with MP after alkaline treatment. Proteomics analysis identified that most graft sites were located on the myosin subunits. Intriguingly, in vitro results showed that the antioxidant activity was barely affected by the MP-Lut binding modes. This work provides a theoretical basis for the application of MP-Lut noncovalent/covalent complexes as functional components.

A comparison of the impacts of different polysaccharides on the sono-physico-chemical consequences of ultrasonic-assisted modifications.

This study aimed to examine the sono-physico-chemical effects of ultrasound (UND) and its impact on the conjugate rates of morin (MOI) following the addition of polysaccharides in various conditions. In comparison to the control group, the incorporation of quaternary ammonium chitosan decreased the rate of MOI conjugation by 17.38%, but the addition of locust bean gum enhanced the grafting rate by 29.89%. Notably, the highest degree of myofibrillar protein (MRN) unfolding (fluorescence intensity: 114435.50), the most stable state (-44.98 mV), and the greatest specific surface area (393.06 cm2/cm3) were observed in the UMP/LBG group. The outcomes of atomic force microscopy and scanning electron microscopy revealed that the inclusion of locust bean gum led to a different microscopic morphology than the other two polysaccharides, which may be the primary cause of the strongest sono-physico-chemical effects of the system. This work demonstrated that acoustic settings can be tuned based on the characteristics of polysaccharides to maximize the advantages of sono-physico-chemical impacts in UND-assisted MOI processing.

Gas chromatography-mass spectrometry-based untargeted metabolomics analysis reveals circulating biomarkers related to wooden breast myopathy in broilers: a preliminary study.

Approaches for the diagnosis of wooden breast (WB) myopathy in live birds are urgently required before applying intervention strategies to reduce occurrence and severity for the poultry industry. The objective of this study was to characterize the serum metabolic profiles in male broilers affected by WB and to identify biomarkers related to this myopathy. Broilers were categorized into normal (CON) and WB groups based on gross scoring and histological evaluation. Gas chromatography-mass spectrometry-based metabolomics, multivariate analysis, and orthogonal partial least squares discriminant analysis revealed a clear separation between CON and WB. A total of 73 significantly different (P < 0.05) metabolites with 17 upregulated and 56 downregulated were identified, which were mainly involved in pathways of alanine, aspartate, and glutamate metabolism, carbohydrate metabolism, and taurine and hypotaurine metabolism. By using the nested cross-validation function of random forest analysis, 9 significantly altered (P < 0.05) metabolites (cerotinic acid, arabitol, phosphoenolpyruvate, terephthalic acid, cis-gondoic acid, N-acetyl-d-glucosamine, 4-hydroxymandelic acid, caffeine, and xanthurenic acid) were identified as biomarkers with an excellent discriminant performance for WB myopathy. Collectively, this study provides new insights for a deeper understanding of the pathogenesis and provides metabolites as biomarkers for diagnostic utilization of WB myopathy.

SaaS sRNA promotes Salmonella intestinal invasion via modulating MAPK inflammatory pathway.

Salmonella Enteritidis is a foodborne enteric pathogen that infects humans and animals, utilizing complex survival strategies. Bacterial small RNA (sRNA) plays an important role in these strategies. However, the virulence regulatory network of S. Enteritidis remains largely incomplete and knowledge of gut virulence mechanisms of sRNAs is limited. Here, we characterized the function of a previously identified Salmonella adhesive-associated sRNA (SaaS) in the intestinal pathogenesis of S. Enteritidis. We found that SaaS promoted bacterial colonization in both cecum and colon of a BALB/c mouse model; it was preferentially expressed in colon. Moreover, our results showed that SaaS enhanced damage to mucosal barrier by affecting expressions of antimicrobial products, decreasing the number of goblet cells, suppressing mucin gene expression, and eventually reducing thickness of mucus layer; it further breached below physical barrier by strengthening invasion into epithelial cells in Caco-2 cell model as well as decreasing tight junction expressions. High throughput 16S rRNA gene sequencing revealed that SaaS also altered gut homeostasis by depleting beneficial gut microbiota while increasing harmful ones. Furthermore, by employing ELISA and western blot analysis, we demonstrated that SaaS regulated intestinal inflammation through sequential activation P38-JNK-ERK MAPK signaling pathway, which enabled immune escape at primary infection stage but strengthened pathogenesis at later stage, respectively. These findings suggest that SaaS plays an essential role in the virulence of S. Enteritidis and reveals its biological role in intestinal pathogenesis.